hi,
taking some time to test your iso.
booting on usb live.
writing this post under your system
.
booting on X directly :
usb mouse and usb keyboard work. The booting time seem to be little more quick than the previous version. All seem normal. so i go to read the vdev log.
all rights execpt for loop (another errors are knowing). this is the output
Code: Select all
[helpers] WARN: /sbin/blkid failed on /dev/loop7, exit status 2
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: /sbin/blkid failed on /dev/loop6, exit status 2
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: /sbin/blkid failed on /dev/loop5, exit status 2
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: /sbin/blkid failed on /dev/loop4, exit status 2
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: /sbin/blkid failed on /dev/loop3, exit status 2
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
02198:00007F582A566700: [ action.c:0676] vdev_action_run_sync: ERROR: vdev_subprocess('"$VDEV_HELPERS/VBoxCreateUSBNode.sh" $VDEV_MAJOR $VDEV_MINOR $(/bin/cat "$VDEV_OS_SYSFS_MOUNTPOINT/$VDEV_OS_DEVPATH/bDeviceClass" 2>/dev/null) vboxusers', use_shell=1) exit status = 1
02198:00007F582A566700: [ action.c:1666] vdev_action_run_commands: ERROR: vdev_action_run_sync('"$VDEV_HELPERS/VBoxCreateUSBNode.sh" $VDEV_MAJOR $VDEV_MINOR $(/bin/cat "$VDEV_OS_SYSFS_MOUNTPOINT/$VDEV_OS_DEVPATH/bDeviceClass" 2>/dev/null) vboxusers') rc = 1
02198:00007F582A566700: [ action.c:0676] vdev_action_run_sync: ERROR: vdev_subprocess('"$VDEV_HELPERS/VBoxCreateUSBNode.sh" $VDEV_MAJOR $VDEV_MINOR $(/bin/cat "$VDEV_OS_SYSFS_MOUNTPOINT/$VDEV_OS_DEVPATH/bDeviceClass" 2>/dev/null) vboxusers', use_shell=1) exit status = 1
02198:00007F582A566700: [ action.c:1666] vdev_action_run_commands: ERROR: vdev_action_run_sync('"$VDEV_HELPERS/VBoxCreateUSBNode.sh" $VDEV_MAJOR $VDEV_MINOR $(/bin/cat "$VDEV_OS_SYSFS_MOUNTPOINT/$VDEV_OS_DEVPATH/bDeviceClass" 2>/dev/null) vboxusers') rc = 1
02198:00007F582A566700: [ action.c:0676] vdev_action_run_sync: ERROR: vdev_subprocess('"$VDEV_HELPERS/VBoxCreateUSBNode.sh" $VDEV_MAJOR $VDEV_MINOR $(/bin/cat "$VDEV_OS_SYSFS_MOUNTPOINT/$VDEV_OS_DEVPATH/bDeviceClass" 2>/dev/null) vboxusers', use_shell=1) exit status = 1
02198:00007F582A566700: [ action.c:1666] vdev_action_run_commands: ERROR: vdev_action_run_sync('"$VDEV_HELPERS/VBoxCreateUSBNode.sh" $VDEV_MAJOR $VDEV_MINOR $(/bin/cat "$VDEV_OS_SYSFS_MOUNTPOINT/$VDEV_OS_DEVPATH/bDeviceClass" 2>/dev/null) vboxusers') rc = 1
02198:00007F582A566700: [ action.c:0676] vdev_action_run_sync: ERROR: vdev_subprocess('"$VDEV_HELPERS/VBoxCreateUSBNode.sh" $VDEV_MAJOR $VDEV_MINOR $(/bin/cat "$VDEV_OS_SYSFS_MOUNTPOINT/$VDEV_OS_DEVPATH/bDeviceClass" 2>/dev/null) vboxusers', use_shell=1) exit status = 1
02198:00007F582A566700: [ action.c:1666] vdev_action_run_commands: ERROR: vdev_action_run_sync('"$VDEV_HELPERS/VBoxCreateUSBNode.sh" $VDEV_MAJOR $VDEV_MINOR $(/bin/cat "$VDEV_OS_SYSFS_MOUNTPOINT/$VDEV_OS_DEVPATH/bDeviceClass" 2>/dev/null) vboxusers') rc = 1
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
[helpers] WARN: Could not find pvs in /sbin/pvs. LVM physical volume symlinks in /dev/disk/by-id will not be created.
parent: all initial devices processed
so boot.log
Code: Select all
Starting the system device event dispatcher: vdevd.
alsactl: load_state:1683: Cannot open /var/lib/alsa/asound.state for reading: No such file or directory
Found hardware: "HDA-Intel" "Intel Haswell HDMI" "HDA:80862807,80860101,00100000" "0x1458" "0x5000"
Hardware is initialized using a generic method
Found hardware: "HDA-Intel" "Realtek ALC887-VD" "HDA:10ec0887,1458fa10,00100302" "0x1458" "0xfa10"
Hardware is initialized using a generic method
/etc/rc.d/functions: line 209: /etc/rc.d/sensors: Permission denied
gtk-update-icon-cache: Cache file created successfully.
<29>Dec 16 01:53:47 haveged: haveged starting up<30>Dec 16 02:04:28 dhcpcd[25401]: wlan0: adding address xx::xx:xx:xx:xx<30>Dec 16 02:04:28 dhcpcd-run-hooks[25414]: wlan0: starting wpa_supplicant<27>Dec 16 02:04:28 dhcpcd-run-hooks[25417]: wlan0: failed to start wpa_supplicant<27>Dec 16 02:04:28 dhcpcd-run-hooks[25418]: wlan0: Successfully initialized wpa_supplicant
Line 1182: unknown EAP method 'SIM'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 1182: failed to parse eap 'SIM'.
Line 1185: failed to parse network block.
Line 1192: unknown EAP method 'PSK'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 1192: failed to parse eap 'PSK'.
Line 1196: failed to parse network block.
Line 1228: unknown EAP method 'IKEV2'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 1228: failed to parse eap 'IKEV2'.
Line 1231: failed to parse network block.
Failed to read or parse configuration '/etc/wpa_supplicant/wpa_supplicant.conf'.<30>Dec 16 02:04:28 dhcpcd[25401]: DUID xx:xx:xx:xx:1e:03:75:xx:xx:xx:14:38:xx:xx<30>Dec 16 02:04:28 dhcpcd[25401]: eth0: IAID xx:xx:xx:xx<30>Dec 16 02:04:28 dhcpcd[25401]: wlan0: waiting for carrier<30>Dec 16 02:04:28 dhcpcd[25401]: wlan0: carrier acquired<30>Dec 16 02:04:28 dhcpcd[25401]: wlan0: IAID xx:xx:xx:92<30>Dec 16 02:04:28 dhcpcd[25401]: wlan0: carrier lost<30>Dec 16 02:04:28 dhcpcd[25401]: eth0: soliciting a DHCP lease<30>Dec 16 02:04:29 dhcpcd[25401]: eth0: soliciting an IPv6 router<30>Dec 16 02:04:29 dhcpcd[25401]: eth0: offered xx.xx.xx.84 from xx.xx.xx.1<30>Dec 16 02:04:35 dhcpcd[25401]: eth0: leased xx.xx.xx.xx for 864000 seconds<30>Dec 16 02:04:35 dhcpcd[25401]: eth0: adding route to xx.xx.xx.0/xx<30>Dec 16 02:04:35 dhcpcd[25401]: eth0: adding default route via xx.xx.xx.1<30>Dec 16 02:04:35 dhcpcd[25401]: forked to background, child pid 25464<28>Dec 16 02:04:41 dhcpcd[25464]: eth0: no IPv6 Routers available<29>Dec 16 02:28:20 dbus[24780]: [system] Reloaded configuration<29>Dec 16 02:28:20 dbus[24780]: [system] Reloaded configuration<83>Dec 16 02:28:20 groupadd[25594]: PAM _pam_init_handlers: no default config other<86>Dec 16 02:28:20 groupadd[25594]: group added to /etc/group: name=avahi, GID=84<86>Dec 16 02:28:20 groupadd[25594]: group added to /etc/gshadow: name=avahi<86>Dec 16 02:28:20 groupadd[25594]: new group: name=avahi, GID=84<83>Dec 16 02:28:20 useradd[25598]: PAM _pam_init_handlers: no default config other<86>Dec 16 02:28:20 useradd[25598]: new user: name=avahi, UID=84, GID=84, home=/, shell=/bin/nologin<30>Dec 16 02:50:44 alsactl[7680]: alsactl 1.0.29 daemon started<30>Dec 16 02:50:44 alsactl[7680]: alsactl: load_state:1683Cannot open /var/lib/alsa/asound.state for reading: No such file or directory
logged directly with root privilegies!!!!?? not on alphaos user. well about security, i think isn't good
.
trying some prog from dlauncher from tint2 (perhaps tint2conf is a good idea for configure tint, not present on your system):
all seem working..... and not lol, control center crash the system. mouse always available but impossible to make anything. So trying to pass on another tty with ctrl+alt+f2, ok work. Entering the password for root (toor), console display information about last login but nothing more, i don't have the possibility to use it. So at this step i need to do : ctrl+alt+sup. Ok works, the system reboot.
second test after reboot.
trying to install htop, works(i need to launch dhcpcd before, internet isn't available directly at boot). trying to install arora..... pacman install libsystemd hoooooooo
.not blocked at the base??!! well going to see pacman.conf.
obarun repo in first place (yeaaaaaah lol)(you have now a repository archive on my repo if you want
http://www.obarun.org/src/$arch/archive), ignorePackage and noextract not configured
.
so i'm little curious, i go to see your /etc/rc.d/functions, finding this line : UDEV="/usr/lib/systemd/systemd-udevd". Really??? i go to see this file.... not found
. so i'm little confused....seem to be a forgotten.
i'm continuing to read, no swap enabled..... make a option in you rc.conf to enable it at the demand seem to be a good idea, i think.
Well, trying the sound..... no sound. starting alsamixer, all seem good. inspecting /dev/snd, all seem good. trying to make a test with the command
Code: Select all
[root@alphaos ~]# speaker-test -c 2
speaker-test 1.0.29
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1024:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
Code: Select all
[root@alphaos ~]# ls -la /usr/lib | grep systemd
drwxr-xr-x 5 root root 60 Dec 16 02:28 systemd
Well this is the first report
. Your work is really clean; very good work
ps: can you tell me where you find dlauncher menu please?